Nuraplan AD

Nuraplan AD is a one-part, cold applied water-borne adhesive that provides good adhesion between Nuraplan membranes and masonry substrate such as plastered wall, and concrete.


  • Easy to apply
  • Good water resistance
  • Good general adhesive 

Substrate Preparation
The substrate must be dry, clean and free of dust etc. Imperfections and gaps in the substrate should be filled using suitable filler. 

This product should be stirred thoroughly before use. Application can be done by brush or roller. The application rate varies depending on the type and porosity of the substrate and weather conditions.

Under normal conditions, 8 – 10 m2/litre is recommended. For more porous substrates, e.g. bare, rough concrete, the practical spreading rate is 4 - 5 m2/litre. Prime the substrate and while still wet unroll membrane into position.



Vichayut Hospital - Bangkok Thailand

Copyright © 2015 Hitchins FE Marketing Pte Ltd